K&B 40 Model Airplane Engine
Craftsman: K&B
Catalog #: 2014.19.4
Donor: Joe Bridi
This K&B 40 model airplane engine features a tuned exhaust and some new parts in the original box.
K&B 61 Model Airplane Engine
Craftsman: K&B
Catalog #: 2014.19.5
Donor: Joe Bridi
This K&B 61 model airplane engine was donated by Joe Bridi.
K&B 7.5 Model Outboard Motor
Craftsman: K&B
Catalog #: 2013.49.10
Contributor: Daniel "Buzz" Brunkow
Three different sized K&B model outboard motors are included in this collection. A 3.5 (red trim, left), a 7.5 (gold trim, center) and an 8.2 (Polished flywheel and gold prop, right).
K&B 8.2 Model Outboard Motor
Craftsman: K&B
Catalog #: 2013.49.11
Contributor: Daniel "Buzz" Brunkow
Three different sized K&B model outboard motors are included in this collection. A 3.5 (red trim, left), a 7.5 (gold trim, center) and an 8.2 (Polished flywheel and gold prop, right).
K&B Engines – Designs of Lud Kading
Craftsman: Lud Kading; Display by Tim and Betty Dannels
Knapp Collection #: 616
Catalog #: 2019.33.13
Contributor: Paul Knapp
This display portrays a brief history of Lud Kading’s .020 Infant, .035 Torpedo Jr., and his .049 Torpedo engine designs.
K&B Infant 20 in Dealer’s Display Box
Craftsman: K&B, Box by George Milano
Knapp Collection #: 617
Catalog #: 2019.33.15
Contributor: Paul Knapp
Perhaps one of the first boxes used for the K&B infant in the early 1950s is this unique die-cut box that folds into a display stand.
K&B Infant Model Airplane Engine
Craftsman: K&B
Catalog #: 2008.19.2
Donor: Donald Holcomb
The K&B Infant model airplane engine.
K&B Torpedo .24 Prototypes
Craftsman: Lud Kading
Knapp Collection #: 618
Catalog #: 2019.33.16
Contributor: Paul Knapp
These K&B Torpedo .24 prototypes were built by Lud Kading, of CA, in 1946-’47. The engines are glow and spark ignition.
Kalfus Designed 10cc (.60ci) Tether Boat Engine
Craftsman: Ed Kalfus
Knapp Collection #: 375
Catalog #: 2013.53.5
Contributor: Paul Knapp
This 10cc (.60ci) tether boat engine is 5”-long, 3.5”-wide, 5.5”-high, and weighs 1 lb. 10 oz. The small brass carburetor in the back is set to run the engine at low speed.
Kalfus Designed 15cc (.90ci) Radio Control Boat Engine
Craftsman: Ed Kalfus
Knapp Collection #: 374
Catalog #: 2013.53.4
Contributor: Paul Knapp
This 15cc (.90ci) radio control boat engine is 6.5”-long, 6”-wide, 5”-high, and weighs 2 lbs. 4 oz.
Kalfus Designed 30cc (.18ci) Tether Boat Engine
Craftsman: Ed Kalfus
Knapp Collection #: 361
Catalog #: 2013.53.3
Contributor: Paul Knapp
The Kalfus designed 30cc (.18ci) tether boat engine is 9”-long, 4.5”-wide, 7”-high, and weighs 4 lbs. 6 oz. The air-cooled engine burns methanol on glow ignition
Kaos 40 Sport Pattern Flyer R/C Aircraft
Craftsman: Joe Bridi
Catalog #: 2015.32.3
Donor: Joe Bridi
The “Kaos 40” sport pattern flyer was a popular kit designed by Joe Bridi.
Kavan FK50 MKI 2-Cylinder, Opposed Miniature Airplane Engine
Craftsman: Franz Kavan
Knapp Collection #: 49
Catalog #: 2008.16.07
Contributor: Paul Knapp
This 2-cylinder miniature opposed airplane engine burns methanol on glow ignition. Later production engines became available with a shielded spark ignition.
Kimble Steam Engine
Craftsman: Birk Petersen
Catalog #: 2016.15.63
Donor: Mark Petersen
Birk built this miniature Kimble steam engine.
King “741” 7-Cylinder Radial Airplane Engine
Craftsman: Stephen J. King
Knapp Collection #: 200
Catalog #: 2008.16.42
Contributor: Paul Knapp
This King “741” 7-cylinder, two-cycle, air-cooled radial airplane engine is similar in appearance to the “Gnome” rotary engines of WWI.
King “T85” 2-Cylinder, Air-Cooled Inline Engine
Craftsman: Stephen J. King
Knapp Collection #: 198
Catalog #: 2008.16.41
Contributor: Paul Knapp
Stephen J. King designed and built this two-cylinder engine in 2005. It has an open crankcase for visual effect while the engine is operating.
Kinner 5-Cylinder Radial Airplane Engine
Craftsman: Merritt Zimmerman
Knapp Collection #: 44
Catalog #: 2008.10.12
Contributor: Paul Knapp
Merritt Zimmerman designed, drafted, fabricated and tested this 1/4 scale model Kinner 5-cylinder radial engine.
Kinner Radial Model Airplane Engine
Craftsman: Charles “Chuck” Harty
Knapp Collection #: 523
Catalog #: 2017.27.8
Contributor: Paul Knapp
This Kinner radial model airplane engine was built using construction articles published in Strictly IC magazine. It has a 1.062 bore and a 1.312 stroke for a total displacement of 5.8 cubic inches.
Kitchen in a Box
Craftsman: George & Judy Burke
Catalog #: 2018.47.8
Donor: Anthonly Burke
This small dollhouse room is called Kitchen in a Box.
Showing 20 of 1294 exhibits.