Half Model Providence River Workboat
Craftsman: Luke Boulware
Catalog #: 2022.2.1
Donor: Brian Burcombe
This Providence River Workboat was actually built as a half model mounted to a piece of polished aluminum.
Hand-Cranked Pneumatic Box Organ
Craftsman: Birk Petersen
Catalog #: 2016.15.20
Donor: Mark Petersen
This fascinating hand-cranked box organ plays musical rolls with holes in them.
Hand-Operated Water Pump
Craftsman: Birk Petersen
Catalog #: 2016.15.39a
Donor: Mark Petersen
A miniature hand-operated water pump. The pumping handle circulates water through the pump and into the bucket.
Handmade Farm Wagon
Craftsman: Waco D. Hill
Catalog #: 2020.6.1
Donor: James and Jim Patten
This 1800s era farm wagon was handmade by Waco D. Hill. While still a miniature, the farm wagon was built at a fairly large scale.
Handt 3-Cylinder Radial Aircraft Engine
Craftsman: Erich Handt
Knapp Collection #: 191
Catalog #: 2011.27.15
Contributor: Paul Knapp
In this design, Erich Handt used three carburetors—one for each cylinder. It runs on methanol with oil mixed in for lubrication.
Handt 5-Cylinder Radial Aircraft Engine
Craftsman: Erich Handt
Knapp Collection #: 190
Catalog #: 2011.27.14
Contributor: Paul Knapp
Erich Handt machined and constructed his first two-cycle engine in 1967, and his first successful four-cycle engine in 1971.
Happiness is a Garden Dollhouse
Craftsman: Sara Botts
Catalog #: 2019.5.4
Donor: Van Botts
This dollhouse diorama entitled, “Happiness is a Garden,” was built by Sara Botts.
Harley Engine Jewelry
Craftsman: Bryan Freund
Catalog #: 2013.40.1
Contributor: Craig Libuse
Bryan Freund made these pieces of silver jewelry, including four accurate Harley-Davidson engine pins–two of which are knuckleheads.
Harley Music Box
Craftsman: Donald Riley
Catalog #: 2021.17.1
Contributor: Donald Riley
This music box, entitled “Harley,” features a carousel of motorcycles with flashing head and taillights.
Harley-Davidson Evolution Engine in 1/3 Scale
Craftsman: Roger Butzen
Knapp Collection #: 773
Catalog #: 2024.5.15
Contributor: Paul Knapp
Roger Butzen built this Harley-Davidson Evolution engine in 1/3 scale.
Hat Shop
Craftsman: George & Judy Burke
Catalog #: 2019.14.2
Donor: Anthonly Burke
This dollhouse portrays a small hat shop.
Hat Shop Dollhouse
Craftsman: Edward Kester
Catalog #: 2018.2.1
Donor: Edward Kester
This miniature Hat Shop was built and donated by Edward Kester.
Hawk 40 Single-Cylinder Aircraft Engine
Craftsman: G. Punter
Knapp Collection #: 178
Catalog #: 2008.16.29
Contributor: Paul Knapp
The Hawk 40 aircraft engine has a 7/8-inch bore, 11/16-inch stroke, weighs about 14 ounces, and burns methanol on glow ignition.
HD Special Miniature .05 Powered Tether Car
Craftsman: Doug Parker
Knapp Collection #: 533
Catalog #: 2019.11.7
Contributor: Paul Knapp
This handmade tether car was machined from solid aluminum and steel bar stock. It measures 7-5/8”-long, 2-7/8”-wide, 2-7/8”-high, and weighs 19.2 ounces.
Heinen 5-Cylinder Radial Engine
Craftsman: Charles “Chuck” Harty
Knapp Collection #: 528
Catalog #: 2017.27.7
Contributor: Paul Knapp
This Heinen 5-cylinder radial engine measures 10” in diameter, 7.5”-long, and weighs 10 pounds. The drawings for Jurgen Heinen’s radial were published in Strictly IC magazine in 1990.
Heinen Motore (HEMO) V4
Craftsman: Jurgen Heinen
Knapp Collection #: 164
Catalog #: 2008.10.48
Contributor: Paul Knapp
This V4 engine has a bore of 32 mm and a stroke of 28 mm with a total displacement of 20 cc. It burns methanol on glow ignition and spins a 20 x 8 propeller up to 14,000 rpm.
Henry Ford’s First Engine
Craftsman: Butch Wilson
Knapp Collection #: 735
Catalog #: 2023.2.1
Contributor: Paul Knapp
Butch Wilson’s exquisite rendition of Henry Ford’s first engine, dubbed the “Kitchen Sink” engine. The engine measures about 36″-long, 15″-wide, 13″-high, and weighs about 36 lbs.
Henry Ford’s First Engine
Craftsman: Birk Petersen
Catalog #: 2016.15.62
Donor: Mark Petersen
Birk built this working model of Henry Ford’s first engine, made from plumbing and other fittings.
Her Room Dollhouse
Craftsman: Edward Kester
Catalog #: 2018.2.2
Donor: Edward Kester
This miniature dollhouse built by Edward Kester is titled, “Her Room.”
Showing 20 of 1294 exhibits.