Vertical Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This vertical steam engine can be seen running on compressed air in the Miniature Engineering Craftsmanship Museum.
Vertical Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This unique miniature vertical steam engine features a tiny wooden barrel up top.
Vertical Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This small vertical steam engine is hooked up to run on compressed air while on display at the Miniature Engineering Craftsmanship Museum.
Vertical Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This small vertical steam engine is hooked up to run on compressed air while on display at the Miniature Engineering Craftsmanship Museum.
Vertical Steam Engine With Hypocycloidal Planetary Drive
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This vertical steam engine uses a unique hypocycloidal planetary drive mechanism.
Vertical Stirling Engine With Fan
Craftsman: Ron Schindele
Knapp Collection #: 677
Catalog #: 2021.9.11
Contributor: Paul Knapp
Ron Schindele added a heat-sink and fan to the top of this vertical Stirling engine to increase efficiency.
Vertical Vapor Hit N’ Miss Engine
Craftsman: Ron Schindele
Knapp Collection #: 676
Catalog #: 2021.9.10
Contributor: Paul Knapp
This vertical vapor hit n’ miss engine burns fumes that evaporate off the surface of the fuel inside the tank.
Victorian Home Matchstick Model
Craftsman: Ronald Remsberg
Catalog #: 2012.25.1
Donor: Ronald Remsberg
This 14″-long model of a Victorian home features a full-width porch in the front and a sunroom in the back.
Victorian Single-Cylinder Hit-n-Miss Engine
Craftsman: Phillip Duclos
Catalog #: 2013.50.6
Donor: George and Dorlene Root
This richly decorated red and gold hit-n-miss engine is equipped with a water radiator tank and a raised fuel tank.
Victorian Two-Story
Craftsman: George & Judy Burke
Catalog #: 2019.22.1
Donor: Anthonly Burke
This Victorian two-story dollhouse opens at the front so viewers can peek inside.
Vintage Miller Race Car Model #32
Craftsman: Will Neely
Catalog #: 2011.20.1
Contributor: Will Neely
This scale model vintage #32 Miller sprint car is about 37”-long and has working steering.
Visible V-8 Engine
Craftsman: Revell
Donor: Miniature Engineering Craftsmanship Museum
This model of a small-block Chevrolet engine includes all internal details housed in a clear plastic engine block so the function of each component can be seen in action.
W & A McOnie & Co. Oscillating Steam Engine
Craftsman: Ramon Hoagland
Knapp Collection #: 585
Catalog #: 2019.10.8
Contributor: Paul Knapp
This W & A McOnie & Co. (Moscow) angular oscillating steam engine was built by Ramon Hoagland, of Colorado, in 2017.
Waco UPD-7 Biplane
Craftsman: Ralph Sarosi
Catalog #: 2013.35.14
Donor: Joe Bridi
A wooden model 1940 Waco UPD-7 biplane with green fuselage and yellow wings.
Walking Beam Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This scale model walking beam engine is hooked up to run on compressed air while on display at the Miniature Engineering Craftsmanship Museum.
Walking Beam Steam Engine
Craftsman: Rudy Kouhoupt
Donor: Susan Alvaro
This walking beam steam engine has an interesting geared pattern on the outside of the flywheel.
Wall “Wizard” 2-Cylinder Opposed Engine
Craftsman: Elmer A. Wall
Knapp Collection #: 66
Catalog #: 2008.10.20
Contributor: Paul Knapp
Elmer A. Wall designed this 45 cc air cooled 4-cycle engine with overhead valves.
Wall 4-Cylinder 50cc Water-Cooled Engine Kit (Unassembled)
Craftsman: Tim Mundt
Catalog #: 2024.4.1
Donor: Tim Mundt
An unassembled casting kit for an Elmer Wall 4-cylinder water-cooled gas engine kit.
Wall 4-Cylinder Water-Cooled Engine
Craftsman: Russell Anderson
Catalog #: 2019.21.11
Contributor: Steve Anderson
Several engines built by Russell Anderson, including this Well 4-cylinder 50cc water-cooled engine, are on display in the Miniature Engineering Craftsmanship Museum.
Showing 20 of 1294 exhibits.