![“Trench Art” Miniature Aluminum Ship Propeller](https://craftsmanshipmuseum.com/wp-content/uploads/2023/05/HodgkinsProp1-125x125.jpg)
“Trench Art” Miniature Aluminum Ship Propeller
Craftsman: Unknown
Catalog #: 2014.16.1
Donor: Dennis Hodgkins
This model ship propeller is about 4-1/2″ in diameter. It was made out of metal taken from downed aircraft during WWII.
![“8 Stomp ‘Ore Mill” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk015a-125x125.jpg)
“8 Stomp ‘Ore Mill” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.11
Donor: Mark Petersen
This piece is entitled, “8 Stomp ‘Ore Mill,” and it features four figures jumping rope.
![“Cock-a-Doodle Egg Co.” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk062a-125x125.jpg)
“Cock-a-Doodle Egg Co.” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.48
Donor: Mark Petersen
This hand-cranked toy is called, “Cock-a-Doodle Egg Co.” The animated farm scene is activated by turning a handle on the right side.
![“Egg Drop Soup” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk089a-125x125.jpg)
“Egg Drop Soup” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.74
Donor: Mark Petersen
This hand-cranked animated toy is called, “Egg Drop Soup.”
![“Fire Code”](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk071a-125x125.jpg)
“Fire Code”
Craftsman: Birk Petersen
Catalog #: 2016.15.57
Donor: Mark Petersen
Entitled “Fire Code,” Birk developed this tongue-in-cheek emergency device to be used in case of fire.
![“Runners on the Road” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk098a-125x125.jpg)
“Runners on the Road” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.80
Donor: Mark Petersen
This animated toy is called, “Runners on the Road.” Eight hand-carved figures move their legs as steel balls are shunted from one path to the other.
![“Scatter Gather” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk068a-125x125.jpg)
“Scatter Gather” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.54
Donor: Mark Petersen
This hand-cranked animated toy is called, “Scatter Gather.” Turning the crank causes a series of heads on sticks to go out of alignment.
![“The Gym” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk082a-125x125.jpg)
“The Gym” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.68
Donor: Mark Petersen
This hand-cranked animated toy is called, “The Gym.” When the hand crank is turned, the hand-carved wooden figures perform different exercises.
![“The Machine” Gear Demonstrator](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk074b-125x125.jpg)
“The Machine” Gear Demonstrator
Craftsman: Birk Petersen
Catalog #: 2016.15.60
Donor: Mark Petersen
The Machine” is a hand-cranked demonstration of various gear combinations.
![“The Shoemaker” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk010a-125x125.jpg)
“The Shoemaker” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.8
Donor: Mark Petersen
This carved wooden shoemaker is animated by turning a hand crank.
![“Where Milk Comes From” Animated Toy](https://craftsmanshipmuseum.com/wp-content/uploads/2023/08/Birk083a-125x125.jpg)
“Where Milk Comes From” Animated Toy
Craftsman: Birk Petersen
Catalog #: 2016.15.69
Donor: Mark Petersen
This hand-cranked animated toy is called, “Where Milk Comes From.”
![1/12 Scale Dorpat Great Refractor Telescope](https://craftsmanshipmuseum.com/wp-content/uploads/2023/05/GouldModels-10-125x125.jpg)
1/12 Scale Dorpat Great Refractor Telescope
Craftsman: William "Bill" Gould
Catalog #: 2013.52.1
Donor: William Gould
William Gould created this 1/12 scale model Dorpat telescope for the National Geographic Society’s Centennial Celebration, at Explorer’s Hall in Washington, D.C.
![1/4 Scale 3D-Printed Chevy Racing Engine](https://craftsmanshipmuseum.com/wp-content/uploads/2023/05/3Dchevy01-125x125.jpg)
1/4 Scale 3D-Printed Chevy Racing Engine
Craftsman: William "Bill" Gould
Catalog #: 2013.52.2
Donor: William Gould
This 1/4 scale model of a Chevrolet racing engine is an example of 3D printing. Note that details as fine as the ignition wires and linkages have been reproduced.
![1/4 scale Bentley BR-2 Propeller](https://craftsmanshipmuseum.com/wp-content/uploads/2022/12/k39-BentlyProp-125x125.jpg)
1/4 scale Bentley BR-2 Propeller
Craftsman: Robert Cooper
Knapp Collection #: 39
Catalog #: 2009.9.03
Contributor: Paul Knapp
This scale model is based on the propeller used with a Bentley BR-2 rotary airplane engine in a World War I Sopwith Snipe airplane.
![1/4 Scale Sopwith Snipe Instrument Panel](https://craftsmanshipmuseum.com/wp-content/uploads/2022/12/PK166a-125x125.jpg)
1/4 Scale Sopwith Snipe Instrument Panel
Craftsman: Robert Cooper
Knapp Collection #: 166
Catalog #: 2008.10.49
Contributor: Paul Knapp
A museum-scale (1/4) model of the 1918 British Sopwith Snipe fighter aircraft. This is a copy of the instrument panel from Mr. Cooper’s model.
![1/6 Scale Starliner Schwinn Bicycle](https://craftsmanshipmuseum.com/wp-content/uploads/2024/04/2016.34.4-125x125.png)
1/6 Scale Starliner Schwinn Bicycle
Craftsman: Unknown
Catalog #: 2016.34.4
Donor: Daniel Marks
This blue Starliner Schwinn bicycle was built at 1/6 scale.
![1/8 Scale Bicycle With Basket](https://craftsmanshipmuseum.com/wp-content/uploads/2024/04/2016.34.5-125x125.png)
1/8 Scale Bicycle With Basket
Craftsman: Unknown
Catalog #: 2016.34.5
Donor: Daniel Marks
This red and white ladies bicycle with basket was built at 1/8 scale.
![1/8 Scale Green Mountain Bike](https://craftsmanshipmuseum.com/wp-content/uploads/2024/04/2016.34.7-125x125.png)
1/8 Scale Green Mountain Bike
Craftsman: Unknown
Catalog #: 2016.34.7
Donor: Daniel Marks
This green mountain bike was built at 1/8 scale.
![1/8 Scale Harley-Davidson Throttle Cable](https://craftsmanshipmuseum.com/wp-content/uploads/2023/06/KiefHDthrottleCable-125x125.jpg)
1/8 Scale Harley-Davidson Throttle Cable
Craftsman: Jerry Kieffer
Catalog #: 2007.1.1
Donor: Jerry Kieffer
Jerry Kieffer made this throttle cable for his 1/8 scale model Harley-Davidson motorcycle. The cable was made using a special fixture, which was designed and turned on a Sherline lathe.
Showing 20 of 94 exhibits.