Below you can view more photos of Bryan’s exceptional craftsmanship. Click on images to enlarge.
Harley Engine Pin Projects
Harley Panhead Engine
A larger silver Panhead engine is seen displayed on the cooling fins of an old Harley cylinder head. Hundreds of individual parts are put together to make an engine like this. Bryan estimates more than 350 parts went into this one.
Harley Evo Engine Pins
A carburetor is being attached to the larger Evo engine. Note also the tiny Evo engine, and the one-eyed skull pin to the left.
Harley Panhead Engine Pins
Two smaller Panhead engine pins, with different air cleaner covers, can be seen next to an Indian head penny for size comparison.
Flying Panhead Engine Ring
A special “Flying Panhead” engine ring created by Bryan.
Harley Evo Engines
Two different size Evo engines can be seen under construction. You can see how many detailed parts have to be made to create the engine, particularly on the larger versions. The larger engine sits atop a US nickel for size reference.
Shovelhead Harley Engine
A tiny Shovelhead Harley Davidson engine is under construction here. Two of the pushrod tubes have been inserted.
Harley Evo Engine
A tiny Evo engine sits on a dime for size comparison.
Harley Evolution Engines
Harley Evolution engines in various sizes, modeled in silver by Bryan.
Harley Evo Engine
The Evo engine is being held here for scale reference. This engine required as many as 400 individual pieces at Bryan’s last count.
Harley Engine Pin
A winged Harley engine with a number 1 on the air cleaner adorns Bryan’s well-worn leather rider’s cap.
Harley Panhead Engine
A larger Panhead shows the additional detail added to the larger engine recreations.
Harley Engine Rings
The motorcycle engine theme has also been applied to rings. Bryan said that these rings have stood up to 20+ years of abuse since he made them.
Harley Pins
Skulls, knives, and a Harley engine—a new take on the skull and crossbones theme.
Tools and Shop
Bryan’s Gravers
Bryan’s custom made gravers are ground from old knives.
Casting Setup
Bryan’s first casting setup was a crude affair made from a jar lid.
Kiln Instructions
Instructions from Mr. McCreight’s book, “The Complete Metalsmith,” show how to make a kiln using a flower pot. Bryan had to start somewhere…
ProCraft Oven
The ProCraft oven was a big improvement. Here Bryan’s first oven is seen inside the newer one.
Bryan’s Junk Drawer
Every shop collects a certain amount of leftover pieces and parts from past projects. Bryan’s junk drawer contains some pretty interesting stuff.
Other Art and Jewelry Pieces
Silver Cross
This silver cross was the first piece Bryan cast in production from a rubber mold. It was one of a limited edition of 30 pieces. Although he still gets requests to make more, he won’t go back on his promise to the original limited edition customers.
“Lone Wolf”
This drawing, entitled “Lone Wolf,” was made by Bryan at age 16. His artwork has been popular with customers, as well as his jewelry.
Knife and Ring
A knife and ring that were made while Bryan was still in the Air Force. Also, note the tiny silver knives below the big knife. A couple of small Harley engines, and engine parts, can be seen in the upper left.
Gold Jewelry
The first piece of jewelry that Bryan ever cast in gold.
Wrench Pin
A tiny wrench pin, popular with bikers who prefer to work on their own ride, rather than pay a mechanic to do it for them. “Riding and Wrenching” is part of the lifestyle.
Opal Jewelry
Another of Bryan’s early settings was this opal.
Skull Pin
Among riders, skulls are also a popular theme.
Silver Flame Rings
These are silver flame rings, one with a bead set stone.
Flame Rings
This photo shows both closed and open flame designs. Like skulls, flames are a popular theme in the hot rod culture, as well as with riders.
Fire Department and Harley Pins
A silver fire department pin is shown next to a Harley engine under construction.
Tiger Tooth Necklace
A tiger tooth makes an impressive necklace when crowned with gold. Rubies are bead set below the crown, and diamonds on the other side. On top is a star of India.
Gold Ring With Diamonds
1 karat of diamonds bead set into a gold ring with white gold. Bryan’s challenge here was to make a “masculine” looking ring from these stones and materials.
Eagle Necklaces
Some handsome eagle necklaces under construction. The two bottom ones don’t yet have their claws applied, while the top one does. Bryan noted, “Don’t hug someone when wearing this sculpture, the super-realistic claws tend to grab the other person’s clothing.”
Silver Feather Zipper Pulls
Silver feather zipper pulls make it easier to open zippers with gloves on, plus they look great!
Silver Victorian Home
A silver Victorian house, with a porch attached. There are probably very few subjects that haven’t come Bryan’s way over the years. Each offer their own challenges. The porch of this house was modified to create a teahouse, commemorating another client’s home restoration.
Flying Pig
Another bit of fantasy, and about as far as you can get from an eagle. As they say, “When pigs fly.” Well, this one at least has wings, so who knows?
Prayer Club Ring
A girl’s prayer club ring was built up from several layers of parts, applied one over the other.
Silver Pins
These silver pieces were sent by Bryan for display in the Craftsmanship Museum. The set includes a tiny wrench pin, several vintage Harley crankcases, a Harley Panhead pin, plus two tiny knives.
Silver Pins
In December of 2013, Bryan Freund sent some additional items for display. In the upper left corner is a tiny skull. In the upper right corner is an eagle’s head with an aquamarine blue eye. In the center at the bottom is an eagle with spread wings. The original Panhead engine in the lower left corner is now flanked by a black and silver Shovelhead engine in the lower right corner. The black engine fins make the polished pushrod tubes stand out even more, and give the engine a more realistic look.